Công tắc khẩn địa ch�- Công ty TNHH Mela //x-zel.com Nhà phân phối thiết b�PCCC Mon, 30 Nov 2020 02:43:22 +0000 vi hourly 1 //wordpress.org/?v=6.2.3 //x-zel.com/wp-content/uploads/2021/11/New-Melaco-fire-protection-logo-81x81.png Công tắc khẩn địa ch�- Công ty TNHH Mela //x-zel.com 32 32 Công tắc khẩn địa ch�- Công ty TNHH Mela //x-zel.com/san-pham/cong-tac-khan-bao-chay-ams-vf3031-10-vf3032-10-vf3029-10/?utm_source=rss&utm_medium=rss&utm_campaign=cong-tac-khan-bao-chay-ams-vf3031-10-vf3032-10-vf3029-10 //x-zel.com/san-pham/cong-tac-khan-bao-chay-ams-vf3031-10-vf3032-10-vf3029-10/#respond Wed, 03 Jun 2020 01:49:08 +0000 //demo1.x-zel.com/?post_type=product&p=478 The AMS series of addressable manual pull stations provide a fast and practical means of manually initiating a fire alarm signal. Both single action and dual action manual pull stations are available. Resetting of the pull station requires either a Cat 30 key or a 1/8�hex key (depending upon the model used).
An alarm condition is actuated by pulling down on the handle of the VF3031-10 and VF3032-10 single action models. On the dual action model VF3029-10 the Lift and Pull cover must be lifted before pulling down on the pull station handle. Once the pull station is activated, the handle cannot be put back into a normal standby condition without using the key operated reset feature.
The AMS series is electronically addressable and includes a bi-colored status LED. The LED blinks green indicating normal communication with the DCP compatible SLC loop. When an alarm condition is actuated by pulling the handle, the LED will latch Red to indicate the alarm condition.

�Tải xuống Catalogue VF3031 | VF3032 | VF3029

The post Công tắc khẩn báo cháy AMS VF3031-10 | VF3032-10 | VF3029-10 first appeared on Công ty TNHH Mela.

Bài viết Công tắc khẩn báo cháy AMS VF3031-10 | VF3032-10 | VF3029-10 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

AMS Manual Pull Station
VF3031-10, VF3032-10, and VF3029-10   


Standard Features
�Addressable integrated design
�All metal construction
�Single and dual action models available
�Extremely easy to operate
�Bi-colored status LED indicates Standby and Alarm conditions
�Address is programmable in EEPROM
�Address can be programmed when installed
�Key lock or hex key lock models available
�Enclosed switch with glass rod (included)
�Terminals accept up to 14AWG wire
�Surface mount back box available

Ordering Codes

VF3031-10

Single action with Hex Screw Lock

VF3032-10

Single action with Hex Key Lock

VF3029-10

Dual action with Key Lock

The post Công tắc khẩn báo cháy AMS VF3031-10 | VF3032-10 | VF3029-10 first appeared on Công ty TNHH Mela.

Bài viết Công tắc khẩn báo cháy AMS VF3031-10 | VF3032-10 | VF3029-10 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/cong-tac-khan-bao-chay-ams-vf3031-10-vf3032-10-vf3029-10/feed/ 0 Công tắc khẩn địa ch�- Công ty TNHH Mela //x-zel.com/san-pham/cong-tac-bao-chay-khan-dia-chi-vf3001-10-vf-3002-10/?utm_source=rss&utm_medium=rss&utm_campaign=cong-tac-bao-chay-khan-dia-chi-vf3001-10-vf-3002-10 //x-zel.com/san-pham/cong-tac-bao-chay-khan-dia-chi-vf3001-10-vf-3002-10/#respond Wed, 03 Jun 2020 01:36:35 +0000 //demo1.x-zel.com/?post_type=product&p=475 The VF3001 and VF3002 pull stations are operated by pulling the handle marked “PULL�on the front of the station as far down as it will go. At that point, the station will lock in place and is easily visible from up to 50 feet. The activation handle is reset by opening the station with the key, placing the handle in the normal upright position and relocking the station.
On the dual action, the push bar rotates inward allowing the “PULL�handle to be grasped and operated by a single hand. When used with the VF6024-00 Fast Response Contact Module, each addressable contact monitoring module is programmed with its own unique Signaling Line Circuit (SLC) loop address.
Up to 127 devices can be placed on the Elite SLC loop. The module supervises the wiring to the contact with an End Of Line (EOL) resistor. If a fault condition occurs in the wiring, the module sends a trouble status signal to the fire alarm control panel. When a change of status is sensed by the fast response contact module, it sends an interrupt to the control panel indicating that an alarm has occurred.
After addressing, Manual Pull Stations are fully configurable through Loop Explorer programming software.

�Tải xuống Catalogue VF3001 | VF3002

The post Công tắc khẩn báo cháy địa ch�VF3001-10 | VF 3002-10 first appeared on Công ty TNHH Mela.

Bài viết Công tắc khẩn báo cháy địa ch�VF3001-10 | VF 3002-10 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

Single Action Addressable Pull Station
VF3001-10
Dual Action Addressable Pull Station
VF3002-10


Standard Features
�Single or Dual Action
�Wire head Connections
�Gold Plated Alarm Contacts
�Surface or Weatherproof Backbox
�Optional Auxiliary Alarm Contacts
�Optional Station Colors
�Combined with the VF6024-00 to provide an addressable interface to the Elite SLC loop

Ordering Codes

VF3001-10

Single action addressable pull station

VF3001-10

Dual action addressable pull station

VF3007-10

Interior surface sheet metal backbox – red

VF3008-10

Weatherproof surface die cast metal backbox and gasket assembly – red

VF3009-00

Scored plastic (acrylic) breakrods (1 dozen per pack)

VF6024-00

Fast response contact module

NOTE All models are supplied with one key and one scored, acrylic breakrod.

The post Công tắc khẩn báo cháy địa ch�VF3001-10 | VF 3002-10 first appeared on Công ty TNHH Mela.

Bài viết Công tắc khẩn báo cháy địa ch�VF3001-10 | VF 3002-10 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/cong-tac-bao-chay-khan-dia-chi-vf3001-10-vf-3002-10/feed/ 0