Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com Nhà phân phối thiết b?PCCC Mon, 30 Nov 2020 02:13:05 +0000 vi hourly 1 //wordpress.org/?v=6.2.3 //x-zel.com/wp-content/uploads/2021/11/New-Melaco-fire-protection-logo-81x81.png Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com 32 32 Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com/san-pham/bo-cai-dat-dia-chi-as9000-00/?utm_source=rss&utm_medium=rss&utm_campaign=bo-cai-dat-dia-chi-as9000-00 //x-zel.com/san-pham/bo-cai-dat-dia-chi-as9000-00/#respond Mon, 09 Nov 2020 02:09:44 +0000 //x-zel.com/?post_type=product&p=1648 The Hand Held Programmer is designed for use with all analog sensors and modules.
Address Setting
1. Install sensor onto programmer, ensuring that sensor protrusions align with programmer grooves.
2. Press the left gray button to switch programmer on. A battery check message will appear followed by the device’s address (Unprogrammed sensors will read address 127).
3. Set the required address by incrementing the left and right gray buttons (the display will show three red flashing dots if the address being programmed is different from the device’s current address).
4. When the desired address is present, press the blue button to store that address. The three red dots on the display will no longer be present.
?Tải xuống Catalogue

The post B?cài đặt địa ch?AS9000-00 first appeared on Công ty TNHH Mela.

Bài viết B?cài đặt địa ch?AS9000-00 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

Handheld Programmer
AS9000-00       


Standard Features
?Compact unit
?Easy to use
?Provides address setting and reading
?Can be used on both sensors and modules
?Has the diagnostic ability to display the analog value
?Over 8000 address settings from one battery

Technical Specifications

Rated Voltage 9 VDC
Battery 9 VDC
Weight 0.34 lbs
Length 6 ¼?/span>
Color White

Display Messages

bAt On upon power up (battery check). Also on when battery is low. Low
battery good for up to 3,000 address setting operation.
E0 Attempting to set an address beyond 127
E1 Attempting to program an address with no device connected
E2 Cannot find device after power up
E3 Invalid sensor response
E4 Cannot find the device program
E5 Device read error
E6 Fail during analog value reading

The post B?cài đặt địa ch?AS9000-00 first appeared on Công ty TNHH Mela.

Bài viết B?cài đặt địa ch?AS9000-00 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/bo-cai-dat-dia-chi-as9000-00/feed/ 0 Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com/san-pham/de-dau-bao-thuong-4-6-as2050-as2051-2/?utm_source=rss&utm_medium=rss&utm_campaign=de-dau-bao-thuong-4-6-as2050-as2051-2 //x-zel.com/san-pham/de-dau-bao-thuong-4-6-as2050-as2051-2/#respond Sat, 07 Nov 2020 04:51:52 +0000 //x-zel.com/?post_type=product&p=1647 The AS2050 and AS2051 Series is designed specifically for use with AVENGER Conventional Models AS2032 Photoelectric Smoke Detector, AS2041 Photoelectric with Heat Smoke Detector, AS2030 Photoelectric Smoke Detector, AS2040 Photoelectric Smoke Detector w/heat, or AS2020 and AS2021 Fixed Temperature/Rate-of-Rise Heat Detector.
The Base is an electronics free 6?base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. Refer to the chart (below) for additional specifications. The AS2050 base is a 4?version of the AS2051 6?base.
?Tải xuống Catalogue

The post Đ?đầu báo thường 4?& 6?AS2050 | AS2051 first appeared on Công ty TNHH Mela.

Bài viết Đ?đầu báo thường 4” & 6” AS2050 | AS2051 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

4?and 6?Conventional Base
AS2050-00 and AS2051-00  


Standard Features
?Designed for use with all AVENGER conventional sensors
?Available in 4 and 6 inch models
?Contains a security locking tab for tamper protection

Technical Specifications

Alarm Current 93mA (136mA @ 33V max.)
SLC Loop Idle Current 110
Compatibility Identifier HB-3

The post Đ?đầu báo thường 4?& 6?AS2050 | AS2051 first appeared on Công ty TNHH Mela.

Bài viết Đ?đầu báo thường 4” & 6” AS2050 | AS2051 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/de-dau-bao-thuong-4-6-as2050-as2051-2/feed/ 0 Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com/san-pham/dau-bao-nhiet-loai-thuong-as20420-00-as2021-00/?utm_source=rss&utm_medium=rss&utm_campaign=dau-bao-nhiet-loai-thuong-as20420-00-as2021-00 //x-zel.com/san-pham/dau-bao-nhiet-loai-thuong-as20420-00-as2021-00/#respond Sat, 07 Nov 2020 04:51:51 +0000 //x-zel.com/?post_type=product&p=1646 The AS2020 and AS2021 fixed temperature/rate-of-rise heat detectors are suited to detect in the presence of slow or fast rising temperatures due to burning combustibles.
The construction of these models incorporate a thermistor heat element protected from damage by the built-in, durable plastic guard. These electronic heat detectors incorporate two power/alarm LEDs for 360° indication of status. In standby condition the power LEDs flash Green. In an alarm condition the LEDs latch on Red. The AS2020 and AS2021 electronic heat detection circuitry performs the same function as a Mechanical Device but with Electronic Precision. If the heat rise is less than 12°/minute the detector will not alarm until it reaches its alarm temperature (135° or 190° ± 7.5°F). If the heat rise is greater than 12°/minute the detector will alarm immediately giving an early warning signal and latching the Red alarm LEDs on.
?Tải xuống Catalogue

The post Đầu báo nhiệt loại thường AS2020-00 | AS2021-00 first appeared on Công ty TNHH Mela.

Bài viết Đầu báo nhiệt loại thường AS2020-00 | AS2021-00 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

Fixed Temperature Heat Detector
AS2020-00 and AS2021-00


Standard Features
?Choice of fixed temperature/rate-of-rise 135°F or 190°F heat detector
?UL Listed spacing up to 60?by 60?br />?2 or 4 wire base compatibility, relay bases available
?Highly stable operation, RF/Transient protection
?Low standby current, 35µA nominal
?Two built-in power/alarm LEDs for 360° viewing
?Fully electronic operation
?Power/alarm LEDs confirm detector status
?Compatible with VES detectors and their bases
NOTE Bases are not included with detectors, please order separately.

Technical Specifications

Response AS2020 135° ± 7.5°F
AS2021 190° ± 7.5°F
Supply Voltage 17.7 – 30.0 VDC (4 Wire)
Supervisory Current 40µA @ 24V
Surge Current 160µA max. @ 24V
Alarm Current 150mA max. @ 24V
Contact Rating
N/O Contacts		150mA max. @ 24 V
Ambient Temperature 32ºF – 120ºF
Color / Case Material Bone PC / ABS Blend

The post Đầu báo nhiệt loại thường AS2020-00 | AS2021-00 first appeared on Công ty TNHH Mela.

Bài viết Đầu báo nhiệt loại thường AS2020-00 | AS2021-00 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/dau-bao-nhiet-loai-thuong-as20420-00-as2021-00/feed/ 0 Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com/san-pham/dau-bao-khoi-quang-hoc-loai-thuong-as2042-00-as2043-00-as2044-00/?utm_source=rss&utm_medium=rss&utm_campaign=dau-bao-khoi-quang-hoc-loai-thuong-as2042-00-as2043-00-as2044-00 //x-zel.com/san-pham/dau-bao-khoi-quang-hoc-loai-thuong-as2042-00-as2043-00-as2044-00/#respond Sat, 07 Nov 2020 04:51:49 +0000 //x-zel.com/?post_type=product&p=1645 The AS2042, AS2043, and AS2044 photoelectric smoke detector(s) utilizes one bi-colored LED for indication of status. In a normal standby condition the LED flash Green every 3 seconds. When the detector senses that its sensitivity has drifted outside the UL listed sensitivity window the LED will flash Red every 3 seconds. When the detector senses smoke and goes into alarm the status LED will latch on Red.
The detector utilizes an infrared LED light source and silicon photo diode receiving element in the smoke chamber. In a normal standby condition, the receiving element receives no light from the pulsing LED light source. In the event of a fire, smoke enters the detector smoke chamber and light is reflected from the smoke particles to the receiving element. The light received is converted into an electronic signal.
Fire Judgment signals are processed and compared to a reference level, and when five consecutive signals exceeding the reference level are received within a specified period of time, the time delay circuit triggers the SCR switch to activate the alarm signal. The status LED light continuously during the alarm period.
?Tải xuống Catalogue

The post Đầu báo khói quang học loại thường AS2042-00 | AS2043-00 | AS2044-00 first appeared on Công ty TNHH Mela.

Bài viết Đầu báo khói quang học loại thường AS2042-00 | AS2043-00 | AS2044-00 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

Conventional Photoelectric Smoke Detector
AS2042-00, AS2043-00, AS2044-00


Standard Features
?UL Listed
?Computer-designed non-directional smoke chamber
?360° view of detector status LED
?Low profile, 2?high (with base)
?2 wire base compatibility.
?Highly stable operation, RF/Transient protection
?Low standby current, 59µA at 24VDC
?One built-in power/sensitivity supervision/alarm LED
?Automatic Sensitivity window verification function meets outlined requirements in NFPA 72, Chapter 2 and 7, Inspection, Testing and Maintenance
NOTE Bases are not included with detectors, please order separately.


Ordering Codes

AS2042-00 Photoelectric / Heat Smoke Detector – Ivory Color
AS2043-00 Photoelectric / Heat Smoke Detector – White Color
AS2044-00 Photoelectric / Heat Smoke Detector without magnetic test feature – Ivory Color
AS2050-00 4?Mounting Base
AS2051-00 6?Mounting Base


Technical Specifications

Rated Voltage 12 or 24VDC
Working Voltage 8 – 35VDC
Maximum Voltage 42VDC
Light Source GaAIAs Infrared Emitting Diode
Standby Current 59µA @ 24VDC
Surge Current 160µA max. @ 24V DC
Alarm Current 150mA max. @ 24V DC
Air Velocity Range 0 – 4000 fpm
Ambient Temperature 32ºF – 120ºF
Color / Case Material Bone PC / ABS Blend
Sensitivity Test Feature Automatic Sensitivity window verification test

The post Đầu báo khói quang học loại thường AS2042-00 | AS2043-00 | AS2044-00 first appeared on Công ty TNHH Mela.

Bài viết Đầu báo khói quang học loại thường AS2042-00 | AS2043-00 | AS2044-00 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/dau-bao-khoi-quang-hoc-loai-thuong-as2042-00-as2043-00-as2044-00/feed/ 0 Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com/san-pham/cong-tac-khan-bao-chay-as3036-as3037-as3038-as3039-as3045/?utm_source=rss&utm_medium=rss&utm_campaign=cong-tac-khan-bao-chay-as3036-as3037-as3038-as3039-as3045 //x-zel.com/san-pham/cong-tac-khan-bao-chay-as3036-as3037-as3038-as3039-as3045/#respond Sat, 07 Nov 2020 04:32:41 +0000 //x-zel.com/?post_type=product&p=1644 Conventional Manual Pull Stations available in a number of configurations supporting Fire Alarm & Fire Suppression System.
Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. Most models are connected via terminal block connections (see ordering codes on second page)
?Tải xuống Catalogue

The post Công tắc khẩn báo cháy AS3045 | AS3046 | AS3048 | AS3049 | AS3051 first appeared on Công ty TNHH Mela.

Bài viết Công tắc khẩn báo cháy AS3045 | AS3046 | AS3048 | AS3049 | AS3051 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

Conventional Devices
Manual Non-Coded Pull Station for Fire & Releasing Applications


Standard Features
?Single or Dual Action
?Enclosed switch with glass rod (included)
?10 Amps @ 120 VAC Snap Action Switch
?Made in USA

Ordering Codes

Part numberDescription
AS3045-10Conventional Pull Station for Fire Suppression Release – Red SPST
AS3045-10Conventional Pull Station for Fire Suppression Release – Red DPST
AS3045-50
Conventional Pull Station for Fire Suppression Release – Yellow SPST
AS3045-56
Conventional Pull Station for Fire Suppression Release – Yellow DPST
AS3046-10Conventional Pull Station, Single Action, Red, Hex Key SPST
AS3046-16Conventional Pull Station, Single Action, Red, Hex Key DPST
AS3048-10Conventional Pull Station, Single Action, Red, Cat 30 Key SPST
AS3048-16Conventional Pull Station, Single Action, Red, Cat 30 Key DPST
AS3049-10Conventional Pull Station, Dual Action, Red, Hex Key SPST
AS3049-16Conventional Pull Station, Dual Action, Red, Hex Key DPST
AS3051-10Conventional Pull Station, Dual Action, Red, Cat 30 Key SPST
AS3051-16Conventional Pull Station, Dual Action, Red, Cat 30 Key DPST
AS3052-10Conventional Pull Station, Single Action,Weatherproof, Red, Hex Key SPST, Pig Tails
AS3053-10Conventional Pull Station, Single Action,Weatherproof, Red, Cat 30 Key, SPST
AS3053-16Conventional Pull Station, Single Action,Weatherproof, Red, Cat 30 Key, DPST
AS3054-16Conventional Pull Station, Single Action,Explosion Proof, Red, Hex Key, DPST


Technical Specifications

Contact Rating10A @ 120 VAC
Operating Temperature-30°F (-35 °C) ~ 150°F (66°C)

The post Công tắc khẩn báo cháy AS3045 | AS3046 | AS3048 | AS3049 | AS3051 first appeared on Công ty TNHH Mela.

Bài viết Công tắc khẩn báo cháy AS3045 | AS3046 | AS3048 | AS3049 | AS3051 đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/cong-tac-khan-bao-chay-as3036-as3037-as3038-as3039-as3045/feed/ 0 Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com/san-pham/hien-thi-phu-supreme-cp-2-4-8-vung/?utm_source=rss&utm_medium=rss&utm_campaign=hien-thi-phu-supreme-cp-2-4-8-vung //x-zel.com/san-pham/hien-thi-phu-supreme-cp-2-4-8-vung/#respond Sat, 07 Nov 2020 04:32:34 +0000 //x-zel.com/?post_type=product&p=1643 The Supreme CP Annunciator provides remote status indications of the Supreme CP Fire Control Panel for fire, trouble and supervisory conditions. Status indications of the annunciator are reported for 2, 4, or 8 zones. Zone LED indicators and Status LED indicators are synchronized to light at identical rates.
The Supreme CP Annunciator includes an internal sounder and an automatic control for adjusting the lamp intensity of the Power and Trouble LEDs on the fascia of the unit.
The annunciator provides connections for 24 VDC power and RS 485 communication. The RS 485 Bus supports maximum of 7 Supreme-CP Annunciators. The Supreme CP Annunciator includes a dip switch for addressing and an End Of Line Resistor (EOLR). LEDs are included inside the annunciator for monitoring heart beat, error, transmit and receive conditions. The fascia and backbox of the Supreme CP Annunciator is provided in colors of gray or red. The user can write specific zone description on the labels to the right of the zone LEDs.
?Tải xuống Catalogue

The post Hiển th?Ph?Supreme CP 2/4/8 vùng first appeared on Công ty TNHH Mela.

Bài viết Hiển th?Ph?Supreme CP 2/4/8 vùng đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

Supreme CP Annunciator


Standard Features
?UL 864 Approved
?Red or Gray
?Available for 2, 4, or 8 zone models
?Fire, Trouble and Supervisory annunciation
?Internal Buzzer
?Internal Trouble diagnosis indicators
?Easy access to terminals
?Four wire connection (data and power)
?Supervised data connection
?Up to 7 annunciators per systems
?Compatible with flush mount collar (AS1821-X0)


Ordering Codes

AS1885-12 2 Zone Panel – Red
AS1885-42 2 Zone Panel – Gray
AS1885-14 4 Zone Panel – Red
AS1885-44 4 Zone Panel – Gray
AS1885-18 8 Zone Panel – Red
AS1885-48 8 Zone Panel – Gray

Technical Specifications

Size 7 1/3”W x 5 1/5”H x 2 1/5”D
Construction 18AWG mild steel
Finish Epoxy powder coated
Color Red (optional gray)
Weight 2 lbs
Input Voltage 24 VDC
Alarm Current 40 mA max @ 24 VDC
Standby Current 14 mA max @ 24 VDC
Maximum Number of Units Maximum of 7 Annunciators on the AUX 24V output and the RS-485 Serial Bus
Connector Terminals 14-24 AWG
RS-485 Serial Bus RS485 two-wire
Maximum distance from control panel – 3900 feet (1200 meters)
Belden 9271 cable
Operating Temperature 32º F to 120º F
Operating Humidity up to 93%, non-condensing

The post Hiển th?Ph?Supreme CP 2/4/8 vùng first appeared on Công ty TNHH Mela.

Bài viết Hiển th?Ph?Supreme CP 2/4/8 vùng đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/hien-thi-phu-supreme-cp-2-4-8-vung/feed/ 0 Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com/san-pham/thiet-bi-bao-chay-supreme-cp-2-4-8-vung/?utm_source=rss&utm_medium=rss&utm_campaign=thiet-bi-bao-chay-supreme-cp-2-4-8-vung //x-zel.com/san-pham/thiet-bi-bao-chay-supreme-cp-2-4-8-vung/#respond Sat, 07 Nov 2020 04:32:30 +0000 //x-zel.com/?post_type=product&p=1642 The Supreme CP range of conventional fire control panels with optional built in communicator are available with 2, 4, or 8 initiating circuits which may be extensively configured via a simple front panel operated programming method.
The low standby power requirements and cost effective small batteries allow the panel to be mounted in a small discrete enclosure which is available in standard red or optionally in an attractive gray color. A simple programming method using just 3 front panel buttons allows an extensive list of configuration options to be set and reviewed. Single board construction which allows easy removal of all electronic parts and ample provision of cable entry knockouts simplify installation.
4 Amp notification appliance power and built in selectable sync protocols provide ample power and control for a wide range of standard notification appliances. The optional DACT allows dual line reporting to central stations and provides a 500 event history buffer.
?Tải xuống Catalogue

The post Thiết b?báo cháy Supreme CP 2/4/8 Vùng first appeared on Công ty TNHH Mela.

Bài viết Thiết b?báo cháy Supreme CP 2/4/8 Vùng đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

Supreme CP
Conventional Fire Control Panels


Standard Features
?UL864 approved
?Two, four, or eight initiating circuits
?Initiating circuits individually configurable as fire or supervisory
?Two 2.5A Notification Appliance Circuits
?4.0 Amps total NAC power available
?Selectable NAC sync protocols
?5 Amp power supply
?Alarm verification selectable by zone
?Resettable AUX power output rated at 0.3A
?AUX power configurable to power off and on
?Fire condition
?Fire, Trouble and Supervisory relays
?Single person walk test function
?Many advanced configuration options
?24 hour standby with 7Ah batteries
?Maximum battery size 12Ah
?Optional DACT (SIA or Contact ID allowing user definable reporting codes)

Ordering Codes

AS1842-10/11 2 Zone Panel – Red 120V / 240V
AS1842-40/41 2 Zone Panel – Gray 120V / 240V
AS1844-10/11 4 Zone Panel – Red 120V / 240V
AS1844-40/41 4 Zone Panel – Gray 120V / 240V
AS1848-10/11 8 Zone Panel – Red 120V / 240V
AS1848-40/41 8 Zone Panel – Gray 120V / 240V
AS1852-10/11 2 Zone Panel with Dialer – Red 120V / 240V
AS1852-40/41 2 Zone Panel with Dialer – Gray 120V / 240V
AS1854-10/11 4 Zone Panel with Dialer – Red 120V / 240V
AS1854-40/41 4 Zone Panel with Dialer – Gray 120V / 240V
AS1858-10/11 8 Zone Panel with Dialer – Red 120V / 240V
AS1858-40/41 8 Zone Panel with Dialer – Gray 120V / 240V
AS1850-00 8 reporting zone DACT
AS1841-00 DACT Configuration Software


Technical Specifications

Size 14.5”W x 12.2”H x 4.25”D
Construction 18AWG mild steel
Finish Epoxy powder coated
Color Red (optional gray)
Supply Voltage 120V AC or 240V AC
AC Supply Fuse 5 Amp 250V 20mm
Power Supply DC Rating 24V 5 Amps
Maximum Battery Size 12Ah 12V (2 per panel)
Trouble Contact Rating 30V DC 1 Amp
Supervisory Contact Rating 30V DC 1 Amp
Fire Contact Rating 30V DC 1 Amp
NAC Rating 2.5A per circuit 4A Total
Detection Zone Current 1.6mA
Detection Zone EOL Resistor 6k8 5%
NAC EOL Resistor 10k 5%
Cable Capacity 14 AWG
Operating Temperature 23º F to 122º F
Operating Humidity up to 95%, non-condensing

The post Thiết b?báo cháy Supreme CP 2/4/8 Vùng first appeared on Công ty TNHH Mela.

Bài viết Thiết b?báo cháy Supreme CP 2/4/8 Vùng đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/thiet-bi-bao-chay-supreme-cp-2-4-8-vung/feed/ 0 Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com/san-pham/trung-tam-bao-chay-dia-chi-oasis-2-16-loops/?utm_source=rss&utm_medium=rss&utm_campaign=trung-tam-bao-chay-dia-chi-oasis-2-16-loops //x-zel.com/san-pham/trung-tam-bao-chay-dia-chi-oasis-2-16-loops/#respond Sat, 07 Nov 2020 04:01:03 +0000 //x-zel.com/?post_type=product&p=1622 The all new OASIS product range of fire alarm control equipment combines the very latest hardware and software to produce a control and indication system, which is powerful and sophisticated, yet simple to use and understand. The flexibility of the OASIS platform is such that it can be re-configured to realize many other control and indication applications, with direct integration into intelligent buildings.
?Tải xuống Catalogue

The post Trung tâm báo cháy địa ch?OASIS 2 ?16 loops first appeared on Công ty TNHH Mela.

Bài viết Trung tâm báo cháy địa ch?OASIS 2 – 16 loops đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

OASIS
Analog Addressable Fire Alarm Control Panels    


Standard Features
?UL Listed (Tenth Edition) 
?2 to 8 loop or 2 to 16 loop versions
?400mA loop current
?4 programmable NACs; Class B or 2 Class
A with internal synchronization
?5.25 A or 10.25 A power supply options
?3 programmable inputs and 5
programmable relay outputs
?7 inch, full-color resistive touch screen
with intuitive user interface
?Up to 24 programmable soft “function keys?br />?Up to 64 user login accounts
?Hard-wired fire and trouble routing inputs and outputs
?Modular and expandable electronics
?400 subaddress points per loop (800 per loop module)
?Option to “invert?inputs and outputs
?5000 programmable cause and effects;
over 50,000 inputs and outputs
?Can be networked with programmable functionality
?Programming via USB port to PC or memory stick

The post Trung tâm báo cháy địa ch?OASIS 2 ?16 loops first appeared on Công ty TNHH Mela.

Bài viết Trung tâm báo cháy địa ch?OASIS 2 – 16 loops đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/trung-tam-bao-chay-dia-chi-oasis-2-16-loops/feed/ 0 Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com/san-pham/trung-tam-bao-chay-dia-chi-supreme-2-4-loops/?utm_source=rss&utm_medium=rss&utm_campaign=trung-tam-bao-chay-dia-chi-supreme-2-4-loops //x-zel.com/san-pham/trung-tam-bao-chay-dia-chi-supreme-2-4-loops/#respond Sat, 07 Nov 2020 04:00:59 +0000 //x-zel.com/?post_type=product&p=1621 The AS1420 and AS1440 analog addressable FACP with networked releasing, supports 2 or 4 SLC loops
for a total of 500 primary points and up to 800 points using subpoints. SLC loop communications uses
standard twisted pair cabling, shielded cable is not necessary.
The panel may be configured with various communication cards; Communications options support remote programming, central station monitoring, Virtual Panel, and networking.
The Panel can be configured as a stand-alone panel with just a few devices for a small building; it can also
operate as the building system and can be part of a network with a total of 64 nodes serving a multiple building campus or a very large facility.
Autolearn capability provides a convenient method to troubleshoot new installations before final programming is loaded.
?Tải xuống Catalogue

The post Trung tâm báo cháy địa ch?SUPREME (2-4 Loops) first appeared on Công ty TNHH Mela.

Bài viết Trung tâm báo cháy địa ch?SUPREME (2-4 Loops) đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

SUPREME| Analog Addressable Fire Control Panels

AS1420-10 (2 Loop)
AS1440-10 (4 Loop)


Standard Features
?UL 864 9th Edition listed
?Multi-Loop 2 Analog Addressable Loops Field upgradable to 4
?127 primary points per loop
?Powerful, network wide cause and effects (500 total)
Fully user programmable by point or zone.
?Up to 800 points per panel when using devices and sub-points
?Up to 10,000 feet wiring length on SLC loop
?64 Panels on a network
?Programmable through a PC connection
to the panel, or through keypad
?Programmable on-board relays ?5
?Supervised Powered Outputs ?3
?Programmable Notification Appliance Circuits: 4
?Power per NAC: 1.6 Amps Max
?Programmable outputs on SLC loop
?Programmable Function button on front display
?Fire Drill button on front display
?Day and night sensitivity settings (user programmable)
?Power Supply: 5.25 Amp, regulated & integrated
?LCD Display: 8×40
?Zonal Mode: Annunciation by zone w/o individual relationships
?Panel Ring Modes: Common, Zonal, Stage 2
?NAC Outputs programmable as Continuous, March, Temporal
?Program Cause and Effects AND, OR, or Any Two (Cross Zone)
?Battery size: Up to 17 Ah in standard enclosure;
up to 52 Ah with external cabinet
?Access levels: 3
?Access key switch: Yes
?Recognized for use in High Rise
?One man walk test ?Fire Test Mode
?Available with semi flush trim ring
?Available in Red or Gray

The post Trung tâm báo cháy địa ch?SUPREME (2-4 Loops) first appeared on Công ty TNHH Mela.

Bài viết Trung tâm báo cháy địa ch?SUPREME (2-4 Loops) đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/trung-tam-bao-chay-dia-chi-supreme-2-4-loops/feed/ 0 Thiết b?báo cháy Avenger - Công ty TNHH Mela //x-zel.com/san-pham/trung-tam-bao-chay-dia-chi-supreme-rs-1-2-loops/?utm_source=rss&utm_medium=rss&utm_campaign=trung-tam-bao-chay-dia-chi-supreme-rs-1-2-loops //x-zel.com/san-pham/trung-tam-bao-chay-dia-chi-supreme-rs-1-2-loops/#respond Sat, 07 Nov 2020 04:00:57 +0000 //x-zel.com/?post_type=product&p=1620 Supreme RS is a versatile range of open protocol fire alarm control panels compatible with existing Supreme fire alarm panel technology.
Available with one or two detection loops for a total of 254 primary SLC points or up to 800 points using addresses and subaddresses. Supreme RS uses leading edge microprocessor based electronics to provide a flexible control system with high reliability and integrity.
Suitable for all small to medium sized fire detection systems, Supreme RS control panels can be expanded and networked to become part of much larger systems if the need arises, therefore providing a future proof solution for any installation.
With its large graphical display and ergonomic button and indicator layout, the Supreme RS control panel is simple and straightforward to understand for installers, commissioning engineers, and end users alike.
?Tải xuống Catalogue

The post Trung tâm báo cháy địa ch?Supreme RS (1-2 Loops) first appeared on Công ty TNHH Mela.

Bài viết Trung tâm báo cháy địa ch?Supreme RS (1-2 Loops) đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]>

Supreme RS| Analog Addressable Fire Control Panels 

AS0810-10 (1 Loop)
AS0820-10 (2 Loop)
Standard Features
?One full SLC circuit expandable to two 3 programmable relays
?5.25A power supply
?Large graphic display
?Real time clock
?Compatible with eMATRIX graphics annunciator
?Powerful, network wide cause and effects (500 total)
?Fully userprogrammable by point or zone
?Can be networked with additional RS and/ or Supreme control panels
?Compatible with eVIEW Annunciator
?Programmable through a PC connection to the panel
?Same look and feel as Supreme range
?Stores 1000 last events in history log
?Model ranges include with or without a Dual-Line internal DACT
?Compact, stylish enclosure
?Available in Red or Gray
?2 Programmable NAC circuits with internal synchronization support

The post Trung tâm báo cháy địa ch?Supreme RS (1-2 Loops) first appeared on Công ty TNHH Mela.

Bài viết Trung tâm báo cháy địa ch?Supreme RS (1-2 Loops) đã xuất hiện đầu tiên vào ngày Công ty TNHH Mela.

]]> //x-zel.com/san-pham/trung-tam-bao-chay-dia-chi-supreme-rs-1-2-loops/feed/ 0